HomeGallery
2009 SULLAIR Model 900XHH-1150XH, 1150CFM High Pressure Air Compressor, s/n 200909240075
2009 SULLAIR Model 900XHH-1150XH, 1150CFM High Pressure Air Compressor, s/n 200909240075
2009 SULLAIR Model 900XHH-1150XH, 1150CFM High Pressure Air Compressor, s/n 200909240075, powered by Cat C-15, 540HP diesel engine, equipped with 350 PSI, mounted on an oilfield skid base. In good condition. (Meter Reads 2,493 Hours)

1977 CHICAGO PNEUMATIC Model 7000 Top Head Drive Rotary Drilling Rig s/n 97328
1977 CHICAGO PNEUMATIC Model 7000 Top Head Drive Rotary Drilling Rig s/n 97328
1977 CHICAGO PNEUMATIC Model 7000 Top Head Drive Rotary Drilling Rig s/n 97328, powered by Cat 3406 deck engine, equipped with GHH 825-300 air compressor, 43’ hydraulic raise mast, 7” diameter 70,000 lb. hydraulic pull back and pull down hydraulic cylinders, 8,000 lb. hydraulic winch and hydraulic jib, hydraulic break-out wrench, pipe carousel, table bushings, fold up rear platform, 3-hydraulic outriggers, 120-volt work lights, mounted on 1975 Mack model DM600 tandem axle chassis, VIN# DM492S1239, powered by Mack 300 diesel engine and Mack 6 speed lo-hole transmission, equipped with Jacobs engine brake, Mack camelback spring suspension, 216” wheelbase, 445/65 22.5 front and 11.00-20 rear tires. In fair to good condition. (Upper Meter Reads 4,441 Hours) (Odometer Reads 060,157 Miles) (Top Head Drive Leaking)

1978 WALKER-NEER Model C33-A Triple Drum Service Rig, s/n 2178
1978 WALKER-NEER Model C33-A Triple Drum Service Rig, s/n 2178
1978 WALKER-NEER Model C33-A Triple Drum Service Rig, s/n 2178, equipped with right angle drive, cable raise and telescope 5-1/2” x 7-1/2” x 65’ double pole mast, spud beam, (the third drum has been removed), auxiliary 8,000 lb. hydraulic winch, air clutches, cat head, spooling device and sheave, cab protector, auxiliary hydraulic tong circuit, 2-hydraulic outriggers, tool box, 2-sheave traveling block, weight indicator, mounted on 1978 International model F-2574 tandem axle chassis, VIN# CF257HHA20526, powered by Cummins 300 diesel engine and Fuller 6 speed transmission, equipped with double frame, Hendrickson beam suspension, 228” wheelbase, 425/65R22.5 front and 11R22.5 rear tires. In fair condition with good tires. (Odometer Reads 082,888 Miles)

(41 Sections) 4-1/2” x 30’ Drill Pipe (Chicago Pneumatic)
(41 Sections) 4-1/2” x 30’ Drill Pipe (Chicago Pneumatic)
(41 Sections) 4-1/2” x 30’ Drill Pipe (Chicago Pneumatic)

1987 CATERPILLAR Model D5H Crawler Tractor, s/n 8RC01071
1987 CATERPILLAR Model D5H Crawler Tractor, s/n 8RC01071
1987 CATERPILLAR Model D5H Crawler Tractor, s/n 8RC01071, powered by Cat 3304 diesel engine and powershift transmission, equipped with 6-way straight blade, Cat model 55H hydraulic winch, s/n 2EJ00448, ROPS canopy, and 20” SBG pads. In good condition with good undercarriage. (Meter Reads 09,050 Hours)

1970 CATERPILLAR Model D6C Crawler Tractor, s/n 10K04014
1970 CATERPILLAR Model D6C Crawler Tractor, s/n 10K04014
1970 CATERPILLAR Model D6C Crawler Tractor, s/n 10K04014, powered by Cat 3306 diesel engine and powershift transmission, equipped with Hyster D6E winch and draw bar, rear gin pole, 114” straight blade with hydraulic tilt, ROPS canopy with sweeps and rear screen, and 22” SBG pads. In good condition with good undercarriage. (Meter Reading N/A) (Tilt Cylinder Frozen)

1976 CATERPILLAR Model D6C Crawler Tractor, s/n 10K12236
1976 CATERPILLAR Model D6C Crawler Tractor, s/n 10K12236
1976 CATERPILLAR Model D6C Crawler Tractor, s/n 10K12236, powered by Cat 3306 diesel engine and powershift transmission, equipped with Hyster winch with draw bar, 148” manual angle, twin hydraulic tilt blade, ROPS canopy with rear screen, and 22” SBG pads. In fair condition with fair undercarriage. (Meter Reads 01,095 Hours) (The undercarriage and blade are worn and the winch drum is damaged)

1973 CATERPILLAR Model D6C Crawler Tractor, s/n 10K08908
1973 CATERPILLAR Model D6C Crawler Tractor, s/n 10K08908
1973 CATERPILLAR Model D6C Crawler Tractor, s/n 10K08908, powered by Cat 3306 diesel engine and powershift transmission, equipped with Cat 56E winch with draw bar, 120” straight blade with hydraulic tilt, ROPS canopy with sweeps and rear screen, and 20” pads. In poor condition with good undercarriage. (Right Lift Jack Removed)

1993 JOHN DEERE Model 310D, 4x4 Tractor Loader Extend-A-Hoe, s/n 794593
1993 JOHN DEERE Model 310D, 4x4 Tractor Loader Extend-A-Hoe, s/n 794593
1993 JOHN DEERE Model 310D, 4x4 Tractor Loader Extend-A-Hoe, s/n 794593, powered by John Deere 4039 diesel engine and shuttle transmission, equipped with general purpose loader bucket, WB 24” digging bucket, ROPS cab with heat, 12-16.5 front and 19.5-24 rear tires. In fair condition with fair tires. (Meter Reads 5,504 Hours)

1982 JOY Model 1050-125 Double Air Compressor Package
1982 JOY Model 1050-125 Double Air Compressor Package
1982 JOY Model 1050-125 Double Air Compressor Package, s/n unknown (ID plate missing), powered by (2) Cat 3406 diesel engines, equipped with (2) Joy rotary screw single stage compressors, heat exchangers, mounted on an oilfield skid base. In fair condition. (Meter Reading N/A) (1 Engine Not Running)

1982 JOY Model 1050-125 Double Air Compressor Package
1982 JOY Model 1050-125 Double Air Compressor Package
1982 JOY Model 1050-125 Double Air Compressor Package, s/n unknown (ID plate missing), powered by (2) Cummins 903 diesel engines, equipped with (2) Joy rotary screw single stage compressors, heat exchangers, mounted on an oilfield skid base. In fair condition. (Meter Reading N/A) (1 Engine Not Running)

1980 JOY Model 1050-125 Air Compressor, s/n 806271080
1980 JOY Model 1050-125 Air Compressor, s/n 806271080
1980 JOY Model 1050-125 Air Compressor, s/n 806271080, powered by Cat 3406 diesel engine, equipped with Joy rotary screw single stage compressor, heat exchangers, mounted on an oilfield skid base. In good condition. (Meter Reading N/A)

1981 JOY Model 1050-125 Air Compressor, s/n 81736681
1981 JOY Model 1050-125 Air Compressor, s/n 81736681
1981 JOY Model 1050-125 Air Compressor, s/n 81736681, powered by Cat 3406 diesel engine, equipped with Joy rotary screw single stage compressor, heat exchangers, mounted on an oilfield skid base. In good condition. (Meter Reading N/A)

1981 JOY Model WB-12X7-5, 2-Stage 950PSI Air Booster Package s/n 81360-2
1981 JOY Model WB-12X7-5, 2-Stage 950PSI Air Booster Package s/n 81360-2
1981 JOY Model WB-12X7-5, 2-Stage 950PSI Air Booster Package s/n 81360-2, powered Cat 3406 diesel engine, equipped with air starter, twin-disk clutch, Joy piston booster, heat exchangers, mounted on an oilfield skid base. In good condition. (Meter Reading N/A) (Zero Hours on Air End Rebuild “2011” by Abby Services)

1980 JOY Model WB-12 Air Booster Package s/n 80-529
1980 JOY Model WB-12 Air Booster Package s/n 80-529
1980 JOY Model WB-12 Air Booster Package s/n 80-529, powered by Cat 3406 diesel engine, equipped with air starter, twin-disk clutch, Joy piston booster, heat exchangers, mounted on an oilfield skid base. In fair condition. (Meter Reading N/A) (Engine Not Running)

COOPER AV1ANA, 4-1/4” Twin Head Single Stage Skid Mounted Air Compressor, s/n 778648
COOPER AV1ANA, 4-1/4” Twin Head Single Stage Skid Mounted Air Compressor, s/n 778648
COOPER AV1ANA, 4-1/4” Twin Head Single Stage Skid Mounted Air Compressor, s/n 778648, Waukesha 4 cylinder diesel engine with Twin Disc manual clutch (Hours N/A) (Condition Unknown)

ATLAS COPCO Model XAS185JD7PE, 185CFM Portable Air Compressor, s/n AIA1591586
ATLAS COPCO Model XAS185JD7PE, 185CFM Portable Air Compressor, s/n AIA1591586
ATLAS COPCO Model XAS185JD7PE, 185CFM Portable Air Compressor, s/n AIA1591586 (on compressor head), H0P035863 (owner supplied), powered by John Deere 4 cylinder diesel engine, 205/75D15 tires. In good condition with good tires. (Meter Reads 00,802 Hours)

2012 WANCO INC. Model CPLT-MO Portable Light Plant, s/n 5F13D1415C1000048
2012 WANCO INC. Model CPLT-MO Portable Light Plant, s/n 5F13D1415C1000048
2012 WANCO INC. Model CPLT-MO Portable Light Plant, s/n 5F13D1415C1000048, powered by Kohler gas engine, equipped with 6 KVA generator, manual raise, (4) lights, and 17.5-13 tires. In good condition with good tires. (Meter Reads 648 Hours)

2005 PETERBILT Model PB335 Tandem Axle Water Truck
2005 PETERBILT Model PB335 Tandem Axle Water Truck
2005 PETERBILT Model PB335 Tandem Axle Water Truck, VIN# 2NPLLD0X65M871867, powered by Cat C7 diesel engine and Eaton Fuller 8LL, 10 speed transmission, equipped with 70 barrel water tank, Masport 3” PTO driven vacuum water pump, rear spray bar, oilfield front bumper, engine brake, Paccar beam & rubber block suspension, 264” wheelbase, double frame, 18,000# front and 40,000# rear axles, 58,000# GVWR, air conditioning, aluminum wheels, power heated mirrors, cruise control, 315/80R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 222,745 Miles) (Meter Reads 13,593 Hours)

Unit #49 2005 MACK Model CV713 Granite Tri-Axle Oil Vac Truck
Unit #49 2005 MACK Model CV713 Granite Tri-Axle Oil Vac Truck
Unit #49 2005 MACK Model CV713 Granite Tri-Axle Oil Vac Truck, VIN# 1M2AG10C15M026585, powered by Mack 6 cylinder diesel engine and Maxitorque T18L/L21/LR/LR21, 18 speed transmission, equipped with Dickirson 100BBL pressurized oil vac body, s/n 4380/38/8, model Dickirson H400W vac pump with spark prevention, 44,000# rears, 18,000# front axle, 13,200# lift axle, 75,200# GVWR, camelback suspension, PTO discharge pump, steerable lift axle, aluminum wheels, 3-stage engine brake, power windows and locks, heated mirrors, cruise control, air conditioning, 315/80R22.5 front, 255/70R22.5 lift, and 11R24.5 rear tires. In good condition with good tires. (Odometer Reads 267,390 Miles) (DANNIC)

Unit #6 2005 MACK Model CV713 Granite Tandem Axle Water Truck
Unit #6 2005 MACK Model CV713 Granite Tandem Axle Water Truck
Unit #6 2005 MACK Model CV713 Granite Tandem Axle Water Truck, VIN# 1M2AG11CX5M017639, powered by Mack 6 cylinder diesel engine and Maxitorque T310M/MLR, 10 speed multi-speed reverse transmission, equipped with BCA 80BBL pressurized tank, s/n 1273, Masport vac pump, spring suspension, aluminum wheels, heated mirrors, cruise control, air conditioning, 315/80R22.5 front and 11R24.5 rear tires. In good condition with good tires. (Odometer Reading N/A – Dead Battery) (DANNIC)

2001 MACK Model RD688S Tandem Axle Water Truck,
2001 MACK Model RD688S Tandem Axle Water Truck,
2001 MACK Model RD688S Tandem Axle Water Truck, VIN# 1M2P270C51M059868, powered by Mack E-7, 400HP diesel engine and Eaton Fuller 8LL 10 speed transmission, equipped with 80 barrel steel water tank, Masport 3” PTO driven vacuum water pump, rear spray bar, oilfield front bumper, Jacobs engine brake, Mack camelback spring suspension, 217” wheel base, double frame, 16,000# front and 40,000# rear axles, 58,000# GVWR, air conditioning, heated mirrors, cruise control, 385/65R22.5 front and 11R24.5 rear tires. In good condition with good tires. (Odometer Reads 401,589 Miles) (Meter Reads 2,538 Hours)

1999 MACK Model RD688S Tandem Axle Water Truck
1999 MACK Model RD688S Tandem Axle Water Truck
1999 MACK Model RD688S Tandem Axle Water Truck, VIN# 1M2P267Y0XM038205, powered by Mack E-7 diesel engine and Eaton Fuller 10 speed transmission, equipped with 80 barrel steel water tank, Masport 3” PTO driven vacuum water pump, rear spray bar, oilfield front bumper, engine brake, Mack camelback spring suspension, 217” wheel base, double frame, 16,000# front and 40,000# rear axles, 58,000# GVWR, air conditioning, heated mirrors, cruise control, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 558,254 Miles) (Meter Reads 18,855 Hours)

1983 INTERNATIONAL Model G2504 Tandem Axle Truck Tractor
1983 INTERNATIONAL Model G2504 Tandem Axle Truck Tractor
1983 INTERNATIONAL Model G2504 Tandem Axle Truck Tractor, VIN# 1HTCG2505DHA16124, powered by Int’l 8 cylinder diesel engine and Fuller 13 speed transmission, equipped with 12’ steel deck with sloped tail, tail roller, stationary 5th wheel, Jacobs 2-stage engine brake, PTO with chain drive, and 11R24.5 tires. In fair condition with fair to good tires. (Odometer Reads 140,134 Miles)

REMOVED FROM AUCTION - 1983 FORD Model 700 Single Axle Winch Truck
REMOVED FROM AUCTION -1983 FORD Model 700 Single Axle Winch Truck, VIN# 1FDXF70K9DVA35812

CHEVROLET Model C-60 Winch Truck, VIN# CCE613V148826
CHEVROLET Model C-60 Winch Truck, VIN# CCE613V148826
CHEVROLET Model C-60 Winch Truck, VIN# CCE613V148826, powered by 8 cylinder gas engine and 5 speed transmission with 2 speed rear, equipped with Leland 9’ A-frame winch body, PTO with chain drive, and 9.00x20 tires. In fair condition with good tires. (Odometer Reads 55,789 Miles) (Not Running)

Unit #18 2006 RAM Model 2500, 4x4 Heavy Duty Pickup Truck
Unit #18 2006 RAM Model 2500, 4x4 Heavy Duty Pickup Truck
Unit #18 2006 RAM Model 2500, 4x4 Heavy Duty Pickup Truck, VIN# 3D7KS26C16G146983, powered by Cummins 6 cylinder diesel engine and automatic transmission, equipped with bed with liner, tow package, Boss 8’ snowplow with quick-tach, air conditioning, and 255/70R17 tires. In fair condition with good tires. (Rear Fenders and Tailgate Rusted) (Inspection Expired June 2019) (DANNIC)

1979 DICKIRSON Tandem Axle Oilfield Float Trailer
1979 DICKIRSON Tandem Axle Oilfield Float Trailer
1979 DICKIRSON Tandem Axle Oilfield Float Trailer, VIN# 1283S, equipped with 32’x8’ wood deck, 7-1/2” rolling tailboard, fold-up landing gear, spring suspension, and 10.00-20 tires. In fair to poor condition with fair tires. (The rear apron and frame of the trailer have rust holes)

1981 ROGERS Model CH55LH1940-1.5, Tandem Axle Rigid Neck Lowboy Trailer
1981 ROGERS Model CH55LH1940-1.5, Tandem Axle Rigid Neck Lowboy Trailer
1981 ROGERS Model CH55LH1940-1.5, Tandem Axle Rigid Neck Lowboy Trailer, VIN# D5159, equipped with 8’x24’ main deck, 7’6” over axles, walking beam suspension, rolling tailboard, and 11R17.5 tires. In fair condition with good tires. (Rust Issues) (Manufacturer From 2009 Registration)

1981 ATOKA 50 Ton Tri-Axle Rigid Neck Lowboy Trailer
1981 ATOKA 50 Ton Tri-Axle Rigid Neck Lowboy Trailer
1981 ATOKA 50 Ton Tri-Axle Rigid Neck Lowboy Trailer, VIN# AT812267, equipped with 8’x24’ main deck, 12’ over axles, rolling tailboard, and 11R17.5 tires. In fair condition with fair to good tires.

1981 LOADCRAFT Model L-35-SS, 35 Ton Tandem Axle Rigid Neck Lowboy Trailer
1981 LOADCRAFT Model L-35-SS, 35 Ton Tandem Axle Rigid Neck Lowboy Trailer
1981 LOADCRAFT Model L-35-SS, 35 Ton Tandem Axle Rigid Neck Lowboy Trailer, VIN# LLD838205BB81032, equipped with 9’ upper deck, 8’x20’ main deck, 8’ over axles, 3’ beavertail, 5’ ramps, and 11R17.5 tires.

Dog Houses, Tanks, and Pumps
Dog Houses, Tanks, and Pumps
Dog Houses, Tanks, and Pumps: 20’x8’ Dog House, equipped with work bench, cabinets, electric ceiling lights, mounted on 35’ oilfield skid base. In fair condition • 35’ x 8’ Dog House, equipped with cabinets, work bench, counters, electric ceiling lights, right side fold-up cat walk, diesel fuel tank, mounted on 1949 Fruehauf tandem axle trailer with spring suspension, and 10.00-22 tires. In fair condition with fair to poor tires • 10’x6’6” Dog House, mounted on 18’ oilfield skid base. In fair condition • 12’6”x16’ 2-Piece Cable Tool Dog House, mounted on oilfield skid base • 37’x8’ Mud Tank, mounted on oilfield skid base. In good condition • 31’4”x7’4” Water Tank, equipped with 7’ 4” x 2’ auxiliary water tank compartment mounted on an oilfield skid base. In poor condition. (Outer Casing Rusted) • 3,000 Gallon, Skid Mounted Fuel Storage Tank • 1,000 Gallon Skid Mounted Steel Diesel Fuel Tank. In good condition. • 28’x7’6” High Skid Mounted Open Top Water Storage Tank • (2) 500 Gallon Poly Tanks • (3) 375 Gallon Poly Tanks • 300 Gallon Poly Tank • (3) 50-Barrel Poly Tank • BETHLEHEM POWER PUMP Model H-150 6 x 12 Duplex Mud Pump, s/n 137, powered by Cat D343 diesel engine and Twin-Disk PTO clutch, equipped with 12” stroke, 4” x 40’ hard suction hose, mounted on an oilfield skid base. In fair condition. (Main Clutch Frozen) • UNUSED DEMCO 6x8 Centrifugal Pump • UNUSED DEMCO 5x6 Centrifugal Pump • (2) 3” Trash Pumps, Honda GX270 gas • 3” Diaphragm Pump • (2) 2” Diaphragm Pumps • 2” and 3” Discharge Hose • Skid Mounted Separator, with meter run, meter house, and Barton flow meter • Skid Mounted Separator, with meter run and meter house

Pipe Tubs, Pipe Boats, and Racks
Pipe Tubs, Pipe Boats, and Racks
Pipe Tubs, Pipe Boats, and Racks: 35’x7’10” Pipe Boat, equipped with tapered wood deck, 8” pipe skids, stake pockets, and draw bars. In good condition. (Needs Re-Decked) • 32’x7’6” Pipe Boat, equipped with tapered wood deck, 8” pipe skids, stake pockets, and draw bars. In good condition. (Needs Re-Decked) • 30’x7’ Pipe Boat, equipped with wood deck, 8” pipe skids, stake pockets, and drawbars. In good condition. (Needs Re-Decked) • (3) 35’x7’4” Pipe Tubs • 36’x8’ Pipe Tub • (2 Sets) 28’ Pipe Racks • (2 Sets) 20’ Pipe Racks • (1 Set) 19’ Pipe Racks

Rig Support Tools and Equipment
Rig Support Tools and Equipment
Rig Support Tools and Equipment: (5) HALKO 6” Down Hole Hammers, (1) with 6-1/4” bit and 6” stabilizer • (2) HALKO 8” Top Hole Hammers, (1) with 8-1/2” bit and 8” stabilizer, and (1) with 12” bit and 10” stabilizer • (48) 2-3/8” Range 3, 40’ Well Casings • (94) 4-1/2” Range 3, 40’ Well Casings • BJ Hydraulic Power Pipe Tongs, equipped with 3-1/2” pipe die • FDT 1160 Pipe Tongs • Assorted Cable Tool Accessories • Assorted Size Door Latch Pipe Elevators • 8-1/2” Hy Drill • GUIBERSON 40 Ton Pneumatic Pipe Slip, with foot control • (10) Assorted Size Rotary Stabilizers • UNUSED 4-1/2” x 21’ Sand Pump • (14) Assorted Size Cable Tool Bailers and Stems • (14) Assorted Size and Style Pipe Elevators • (6) Pipe Lifting Eyes • (6) Pipe Slips and Bowls • LARGE QUANTITY Cable Drill, Cable Tools, and Fishing Tools • (6) Snatch Blocks • (10) Oil Pumping Units • Oil Day Tank • (2) WASHINGTON Rotating Oilers • HACKERMACH 28B Skid Mounted Hydraulic Rotating Table • CARDWELL 44’ Single Pole, Single Drum Telescoping Service Rig, mounted on 7’x7’6” oilfield skid • Dual Skid Mounted GARDNER DENVER Size 401/4 Air Compressors. In good condition.

Equipment and Truck Parts
Equipment and Truck Parts
Equipment and Truck Parts: DETROIT V-12 Diesel Engine, running takeout • Cat D343 Diesel Engine, with manual pump and 10 V-belt sheave (Condition Unknown) • CAT 1673 Diesel Engine, with 5 speed transmission (Condition Unknown) • WAUKESHA 4 Cylinder Diesel Engine (Condition Unknown) • CP 700, 32’ Drill Mast, with 5-steel carousel and top head gear box (CP700) • TULSA Chain Drive Winch, with headache rack • (2) TULSA Chain Drive Winches • (2) BRADEN Chain Drive Winches, with headache racks • FRUEHAUF Chain Drive Winch, with headache rack • Winch Tractor Flatbed • 11’6”x8’ Tandem Axle Winch Tractor Bed, with tail roller, 5th wheel, and winch stand • (2) Mack Truck Hoods • (4) Pickup Headache Racks • (2) 100 Gallon Pickup Fuel Tanks • JOY 1050-125 Rotary Screw Compressor • GEARMATIC Hydraulic Winch • GARDNER FFFXFE Gear Box, s/n 127289

Shop Tools
Shop Tools
Shop Tools: LINCOLN Ranger 225 Amp, 10,000 Watt Welder Generator, Kohler Command 20 gas engine • LINCOLN 225 Amp Electric Welder • MILLERMATIC 251 Mig Welder, with wire feeder • ESAB Multimaster 260 Mig Welder, with wire feeder • VICTOR 52 Master Plasma Cutter • RIDGID 535 Power Threader, with tubing cutter, die, and reamer • JET Horizontal Band Saw • SUN 35 Ton Hydraulic Shop Press

 
1440 Cowpath Rd. Hatfield, Pa 19440 • PH: 215 361-9099 • FAX: 215 361-9212
Site Design by Bergey Creative Group © 2012