|
|
|
|
2007 FORD Model F-550, 4x4 Bucket Truck
2007 FORD Model F-550, 4x4 Bucket Truck, powered by diesel engine and automatic transmission, equipped with Altec AT37G, 37 articulating boom, and 42 working height. In good condition with good tires. |
|
|
2011 FORD Model E-350 Super Duty Cargo Van, VIN# 1FTSE3EL7BDB33266
2011 FORD Model E-350 Super Duty Cargo Van, VIN# 1FTSE3EL7BDB33266, powered by 5.4L gas engine and automatic transmission, equipped with material rack, power windows, locks, and mirrors, cruise control, air conditioning, and 245/75R16 tires. In good condition with good tires. (Odometer Reads 120,180 Miles) |
|
|
2007 FORD Model E-350 Cargo Van, VIN# 1FTSE34L47DA70216
2007 FORD Model E-350 Cargo Van, VIN# 1FTSE34L47DA70216, powered by 5.4L gas engine and automatic transmission, equipped with material rack, material bins, tow package, power windows, locks, and mirrors, cruise control, air conditioning, and 245/75R16 tires. In good condition with fair to good tires. (Odometer Reads 133,899 Miles) |
|
|
2007 FORD Model E-150, 10-Passenger Van, VIN# 1FDNE11W97DB14044
2007 FORD Model E-150, 10-Passenger Van, VIN# 1FDNE11W97DB14044, powered by 4.6L gas engine and automatic transmission, equipped with power windows, locks, and mirrors, cruise control, air conditioning, and 225/75R16 tires. In good condition with good tires. (Odometer Reads 115,837 Miles) |
|
|
2006 HYSTER Model S50FT Fortis, 4,800 lb Solid Tired Forklift, s/n F187V05912D
2006 HYSTER Model S50FT Fortis, 4,800 lb Solid Tired Forklift, s/n F187V05912D, powered by 4 cylinder LP gas engine and shuttle transmission, equipped with 189 3-stage mast, side shift, 48 forks, FOPS canopy, 21x7x15 front and 406x152x267 rear non-marking tires. In good condition with good tires. (Meter Reads 10,734 Hours) (Reserved for Use During Loadout Until Wednesday, September 15th at 12 Noon) |
|
|
2013 SKYJACK Model SJ3326 Scissors Lift, s/n 27016111
2013 SKYJACK Model SJ3326 Scissors Lift, s/n 27016111, powered by 24 volt DC electric, equipped with 7 x 30, 500 lb capacity platform with 3 pullout extension, onboard battery charger, and 16x5x12 non-marking tires. In good condition with good tires. |
|
|
2002 KOHLER Model 250RE0ZE, 250KW Fast Response Backup Generator, s/n 0732613
2002 KOHLER Model 250RE0ZE, 250KW Fast Response Backup Generator, s/n 0732613, powered by Detroit 60 Series, 415HP diesel engine, equipped with 265KW/331KVA/3-phase, multiple taps from 120/240 to 277/480 volts, ASCO 7000 Series automatic power transfer and bypass switch, and Kohler automatic battery charger. In good condition. (Previously Wired 120/208 3-phase) (Located offsite - Purchaser responsible for their own loading and proper insurance document required) (INSPECTION APPOINTMENT IS REQUIRED) |
|
|
2000 ONAN Model DGCB-4491264, 60KW Backup Generator, s/n K000175729
2000 ONAN Model DGCB-4491264, 60KW Backup Generator, s/n K000175729, powered by Cummins 4BT3.9-G4 diesel engine, equipped with 60KW/75KVA/3-phase, enclosure, battery charger, and Onan PowerCommand transfer switch. In good condition. (Meter Reads 0,107 Hours) |
|
|
Pipe Bending
Pipe Bending: GREENLEE Models: (1) 881 (4) 555 (2) 884 & 885 (1) One-Shot (6) 1801 & 1800
Mechanical Benders: ENERPAC Models: (3) BWF888 Mechanical
(40+/-) Hand Pipe Benders, 1/2, 3/4, and 1
PLUS: Variety of shoe dies for EMT and RIDGID, up to 2 |
|
|
Pipe Threading
Pipe Threading: (4) RIDGID 300 Pipe Threaders (2) RIDGID 700 Handheld Power Drives (12) RIDGID 450 Tri Stands (2) Hoghead 2-1/2 to 4 Threader Dies Manual Threaders and Dies (11) RIDGID 318 Oilers |
|
|
Wire Pulling, Knock Out Sets and Wire Carts
Wire Pulling, Knock Out Sets and Wire Carts: (15) Hydraulic Knock Out Sets (4) GREENLEE Fish Vac Systems (18) GREENLEE Reel Stands (30+/-) GREENLEE Cobra & Current Wire Carts |
|
|
Ladders and Scaffolding
Ladders and Scaffolding: (75+/-) Fiberglass Step Ladders from 6 12 (28) 5 Scaffold Bucks (12) 2.5 Scaffold Bucks (28) 7 Aluminum/Wood Pick Boards |
|
|
Welding
Welding: LINCOLN Idealarc TIG250 Tig Welder LINCOLN Weldanpower 225 Amp AC/DC Gas Powered Welder MILLER Electric Buzz Box Welder (2) Oxy/Acetelene Burn Outfits |
|
|
Shop Tools and Hand Tools
Shop Tools and Hand Tools: (2) WELLS Horizontal Band Saws; (3) WESTWARD 1/2 Benchtop Drill Presses (6) PORTER CABLE and B&D Porta-Band Saws LARGE QUANTITY Core Drill and Hole Saw Bits Stud Punches and Cable Cutters Hammer Drills (17) DEWALT and B&D Sawsalls; (9) B&D 1/2 D-Handle Corded Drills (36) DEWALT/BOSCH/B&D 1/2 Pistol Grip Corded Drills (18) B&D 3/8 Corded Drills (33) B&D/DEWALT Screwguns |
|
|
Rigging
Rigging: 1x152 2-Part Adjustable Chain Spreader, 82,600 lb. Capacity Various Length and Diameter Cable Chokers |
|
|
Materials and Conduit
Materials and Conduit: COPALUM Splicing Connectors with Heat Shrinks: (450+/-) Blue Connectors, Part # 608502-1; (155+/-) Red Connectors, Part #608501-1 Various sized EMT and Rigid Conduit, Elbows and Bends Flexible Conduit Double-Sided Cantilevered Material Racks; Breaker Boxes Disconnect Boxes; Stainless Steel Switch Boxes HILTI Hardware and Accessories LARGE QUANTITY of Miscellaneous Electrical Hardware and Fasteners with Wooden Pigeon Hole Storage Shelving |
|
|
Gang Boxes and Carts
Gang Boxes and Carts: (35+/-) Gang Boxes (9) Aluminum Blueprint Plan Tables (40) Rubbermaid Shop Tool Carts (6) Steel Shop Carts Lumber Carts Platform Carts |
|
