HomeGallery
1971 BUCYRUS ERIE Model 30B Super, 60 Ton Crawler Crane, s/n 132715
1971 BUCYRUS ERIE Model 30B Super, 60 Ton Crawler Crane, s/n 132715
1971 BUCYRUS ERIE Model 30B Super, 60 Ton Crawler Crane, s/n 132715, powered by Detroit 6-71 diesel engine, equipped with main and auxiliary hoists, 120’ pin together angle boom consisting of 40’ basic and (4) 20’ inserts, 30’ jib, 2-piece rear counterweight, Johnson 3-sheave hook block, overhaul ball, air controls, independent boom hoist, chain drive extendable tracks, and 36” smooth pads. In good condition with good undercarriage. (Meter Reads 5,990 Hours) (Unit #24035)

1965 BUCYRUS ERIE Model 30B Super, Series III, 50 Ton Crawler Crane, s/n 126459
1965 BUCYRUS ERIE Model 30B Super, Series III, 50 Ton Crawler Crane, s/n 126459
1965 BUCYRUS ERIE Model 30B Super, Series III, 50 Ton Crawler Crane, s/n 126459, powered by Cummins HRF61P diesel engine, equipped with main and auxiliary hoists, 90’ pin together angle boom consisting of 40’ basic, (2) 20’ and (1) 10’ inserts, 2-piece rear counterweight, 3-sheave hook block, overhaul ball, air controls, independent boom hoist, chain drive extendable tracks, and 36” smooth pads. In good condition with good undercarriage. (Meter Reads 4,250 Hours) (Unit #24032)

1964 BUCYRUS ERIE Model 30B Series III, 50 Ton Conventional Truck Crane, s/n 125648
1964 BUCYRUS ERIE Model 30B Series III, 50 Ton Conventional Truck Crane, s/n 125648
1964 BUCYRUS ERIE Model 30B Series III, 50 Ton Conventional Truck Crane, s/n 125648, powered by Cummins HRF61P diesel engine, equipped with main and auxiliary hoists, 150’ pin together tubular angle boom, 2-piece rear counterweight, (2) removable outrigger boxes, air controls, mounted on Hendrickson 8x4 carrier, powered by Waukesha 6 cylinder diesel engine and Fuller 4 speed transmission with 3 speed auxiliary, 14.00x20 tires. In good condition with fair to good tires. (Meter Reads 5,380 Hours) (Odometer Reads 18,889 Miles) (No Hook Block) (Unit #24029)

1967 MANITOWOC Model 2900T Series II, 70 Ton Conventional Truck Crane, s/n 29182
1967 MANITOWOC Model 2900T Series II, 70 Ton Conventional Truck Crane, s/n 29182
1967 MANITOWOC Model 2900T Series II, 70 Ton Conventional Truck Crane, s/n 29182, powered by Cummins NTC300 diesel engine, equipped with main and auxiliary hoists, 160’ pin together tubular angle boom, 60’ jib, single rear counterweight, front bumper counterweight, Johnson 3-sheave hook block, overhaul ball, air controls, (2) removable outrigger boxes, mounted on 8x4 carrier, powered by Cummins NTC 230 diesel engine and 4 speed transmission with 3 speed auxiliary. In good condition with good tires. (Meter Reads 4,324 Hours) (Odometer Reads 997,697 Miles) (Unit #24030)

1978 P&H Model Omega 18, 18 Ton Rough Terrain Crane, s/n 43990
1978 P&H Model Omega 18, 18 Ton Rough Terrain Crane, s/n 43990
1978 P&H Model Omega 18, 18 Ton Rough Terrain Crane, s/n 43990, powered by Detroit 4 cylinder diesel engine and powershift transmission, equipped with 26.23’ - 62.23’, 3-section hydraulic boom, 22’ swing away jib, single hoist, 3-sheave hook block, anti-two block, (4) hydraulic outriggers, and 16.00x24 tires. In good condition with fair to poor tires. (Meter Reads 0,372 Hours) (Boom Cylinder Needs Repacked) (Unit #24033)

2005 ICE Model I12 Diesel Pile Hammer, s/n ZZ20050528B
2005 ICE Model I12 Diesel Pile Hammer, s/n ZZ20050528B
2005 ICE Model I12 Diesel Pile Hammer, s/n ZZ20050528B, equipped with 92’ of leads. In good condition. (Purchased New) (Unit #38086)

ICE Model 32S Diesel Pile Hammer, s/n 102
ICE Model 32S Diesel Pile Hammer, s/n 102
ICE Model 32S Diesel Pile Hammer, s/n 102 (No Leads) (Hoses Need Replaced) (Purchased New) (Unit #38088)

MKT Model 9B3 Pneumatic Pile Hammer, s/n 10240
MKT Model 9B3 Pneumatic Pile Hammer, s/n 10240
MKT Model 9B3 Pneumatic Pile Hammer, s/n 10240, equipped with 2” hose, oiler, and head. (No Leads) (S/N Owner Supplied) (Unit #38052)

Crane Attachments and Rigging
Crane Attachments and Rigging
Crane Attachments and Rigging: OWENS 1/4 Cu Yd Clam Bucket • 1,800# Headache Ball • Fairlead (Bucyrus Erie 30B) • 11’ to 15’ Heavy Duty Cable Slings • Lifting Slings, with hooks • Cable and Chain Spreaders • (2) CLAMP-CO F35 Beam Lifters • (5) Heavy Duty Shackles • Assorted Rigging • Heavy Duty Ratchet Binders • (200’) 1-1/8” Wire Rope • Multiple Multi-Part Bridles

1999 CATERPILLAR Model 330BL Hydraulic Excavator, s/n 6DR02803
1999 CATERPILLAR Model 330BL Hydraulic Excavator, s/n 6DR02803
1999 CATERPILLAR Model 330BL Hydraulic Excavator, s/n 6DR02803, powered by Cat 3306B diesel engine and hydraulic drive, equipped with 10’6” dipper stick, 48” digging bucket, enclosed ROPS cab with heat and air conditioning, and 33.5” TBG pads. In good condition with good undercarriage. (Meter Reads 07,658 Hours) (Purchased New) (Unit #22026)

2000 CATERPILLAR Model 325BL Hydraulic Excavator, s/n 2JR02630
2000 CATERPILLAR Model 325BL Hydraulic Excavator, s/n 2JR02630
2000 CATERPILLAR Model 325BL Hydraulic Excavator, s/n 2JR02630, powered by Cat 3116 diesel engine and hydraulic drive, equipped with 10’ dipper stick, 42” digging bucket, hydraulic coupler, auxiliary hydraulics, enclosed ROPS with heat and air conditioning, and 31.5” TBG pads. In good condition with good undercarriage. (Meter Reads 08,001 Hours) (Purchased New) (Unit #22028)

1990 CATERPILLAR Model 235C Hydraulic Excavator, s/n 5AF00971
1990 CATERPILLAR Model 235C Hydraulic Excavator, s/n 5AF00971
1990 CATERPILLAR Model 235C Hydraulic Excavator, s/n 5AF00971, powered by Cat 3306 diesel engine and hydraulic drive, equipped with 11’6” dipper stick, 52” digging bucket, enclosed ROPS cab, and 30” TBG pads. In good condition with good undercarriage. (Meter Reads 8,990 Hours) (Approximately 3,000 Hours on Out of Frame Engine Rebuild by Cleveland Brothers) (Purchased New) (Unit #22027)

2004 GRADALL Model XL4300 II Rubber Tired Excavator, s/n 0210017494
2004 GRADALL Model XL4300 II Rubber Tired Excavator, s/n 0210017494
2004 GRADALL Model XL4300 II Rubber Tired Excavator, s/n 0210017494, powered by John Deere 6 cylinder diesel engine and hydraulic drive, equipped with 2-section rotating boom, hydraulic leveling, 9’ backfill blade, 66” cleanup bucket, enclosed ROPS cab with heat and air conditioning, and 10.00x20 tires. In good condition with fair to poor tires. (Meter Reads 04,486 Hours) (Unit #22038)

Buckets
Buckets
Buckets: CAT 48” Digging Bucket (Cat 330BL) • 60” Trench Bucket (Gradall) • 42” Digging Bucket (Gradall)

1994 CATERPILLAR Model D4HXL Series III Crawler Tractor, s/n 8PJ00690
1994 CATERPILLAR Model D4HXL Series III Crawler Tractor, s/n 8PJ00690
1994 CATERPILLAR Model D4HXL Series III Crawler Tractor, s/n 8PJ00690, powered by Cat 3304 diesel engine and powershift transmission, equipped with 6-way straight blade, differential steering, ROPS post with canopy, drawbar, and 20” SBG pads. In good condition with good to very good undercarriage (pads fair). (Meter Reads 4,293 Hours) (Purchased New) (Unit #20024)

1981 CATERPILLAR Model 12G Motor Grader, s/n 61M08451
1981 CATERPILLAR Model 12G Motor Grader, s/n 61M08451
1981 CATERPILLAR Model 12G Motor Grader, s/n 61M08451, powered by Cat 3306D diesel engine and powershift transmission, equipped with 12’ fully hydraulic moldboard, front scarifier, enclosed ROPS cab with heat, and 14.00x24 tires. In good condition with fair to good tires. (Meter Reads 01,327 Hours) (Main Pump Resealed 3/12/2021) (Unit #23024)

1989 CATERPILLAR Model IT28B Rubber Tired Loader, s/n 1HF01291
1989 CATERPILLAR Model IT28B Rubber Tired Loader, s/n 1HF01291
1989 CATERPILLAR Model IT28B Rubber Tired Loader, s/n 1HF01291, powered by Cat 3204 diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, hydraulic coupler, auxiliary hydraulics, enclosed ROPS cab with heat, and 17.5R25 tires. In good condition with fair to good tires. (Meter Reads 14,734 Hours) (Approximately 4,300 Hours on Engine Rebuild by Cleveland Brothers) (Unit #21042)

1999 CATERPILLAR Model 416C, 4x4 Tractor Loader Extend-A-Hoe, s/n 4ZN18984
1999 CATERPILLAR Model 416C, 4x4 Tractor Loader Extend-A-Hoe, s/n 4ZN18984
1999 CATERPILLAR Model 416C, 4x4 Tractor Loader Extend-A-Hoe, s/n 4ZN18984, powered by Cat 4 cylinder diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24” digging bucket, enclosed ROPS cab with heat, 12.5/80-18 front and 19.5Lx24 rear tires. In good condition with good tires. (Meter Reads 2,274 Hours) (Purchased New) (Unit #22036)

48” Fork Attachment
48” Fork Attachment
48” Fork Attachment (Cat IT28)

1985 AUTOCAR Tandem Axle Dump Truck
1985 AUTOCAR Tandem Axle Dump Truck
1985 AUTOCAR Tandem Axle Dump Truck, VIN# 1WBUCCJE4FU098781, powered by Cummins NTC300NP, 300HP diesel engine and Fuller 8LL, 10 speed transmission, equipped with 14’ steel dump body, spring/beam suspension, and 11R24.5 tries. In fair to good condition with good tires. (Odometer Reads 0053,946 Miles) (Unit #10123)

1985 AUTOCAR Tandem Axle Dump Truck
1985 AUTOCAR Tandem Axle Dump Truck
1985 AUTOCAR Tandem Axle Dump Truck, VIN# 1WBUCCJE2FUD98780, powered by Cummins NTC300NP, 300HP diesel engine and Fuller 8LL, 10 speed transmission, equipped with 14’ steel dump body, spring/beam suspension, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 282,977 Miles) (Unit #10124)

1972 INTERNATIONAL Loadstar 1800 Single Axle Fuel Truck
1972 INTERNATIONAL Loadstar 1800 Single Axle Fuel Truck
1972 INTERNATIONAL Loadstar 1800 Single Axle Fuel Truck, VIN# 10682H241418, powered by V-8 gas engine and 5 speed transmission, equipped with 1,800 gallon fuel body, PTO pump with gallon indicator, electric winding hose reel, and 10.00x20 tires. In fair condition with fair to poor tires. (Odometer Reads 084,734 Miles) (Off Road Use Only) (Unit #10110)

1967 FORD Model F-600 Single Axle Fuel Truck
1967 FORD Model F-600 Single Axle Fuel Truck
1967 FORD Model F-600 Single Axle Fuel Truck, VIN# F61CEA87778, powered by V-8 gas engine and 5 speed transmission with 2 speed rear, equipped with 1,500 gallon fuel body, PTO pump with gallon indicator, electric winding hose reel, and 9.00R20 tires. In fair condition with fair tires. (Odometer Reads 82,831 Miles) (Pump Cracked; Off Road Use Only) (Unit #10114)

1985 WITZCO Model Challenger RG50, 50 Ton Tri-Axle Lowboy Trailer
1985 WITZCO Model Challenger RG50, 50 Ton Tri-Axle Lowboy Trailer
1985 WITZCO Model Challenger RG50, 50 Ton Tri-Axle Lowboy Trailer, VIN# 1W9A11E56FS061171, equipped with ground bearing detachable gooseneck, 22’ level deck, 22” transition, 8’ over tandems, 4’6” air ride flip up third axle, 96” width, spring suspension, 13HP gas pony motor, outriggers, and 11R22.5 tires. In good condition with good tires. (No Separate Title for Flip Axle) (New Deck) (Purchased New) (Unit #11130)

2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer
2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer
2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer, VIN# 43YDC1627YC007882, equipped with 16’ level deck, 4’6” ramp, 83” deck width, 102” overall width, spring suspension, 10,000# GVWR, surge brakes, and 225/75R15 tires. In good condition with good tires. (Model Owner Supplied) (Purchased New) (No VIN Plate) (Unit #11159)

2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer
2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer
2000 BRI-MAR Model EH16-10 Tandem Axle Tag-A-Long Trailer, VIN# 43YDC1625YC007881, equipped with 16’ level deck, 4’6” ramp, 83” deck width, 102” overall width, spring suspension, 10,000# GVWR, surge brakes, and 225/75R15 tires. In good condition with good tires. (Model Owner Supplied) (Purchased New) (No VIN Plate) (Unit #11160)

CATERPILLAR Model SR4, 210KW Skid Mounted Generator, s/n 5HA04670
CATERPILLAR Model SR4, 210KW Skid Mounted Generator, s/n 5HA04670
CATERPILLAR Model SR4, 210KW Skid Mounted Generator, s/n 5HA04670, powered by Cat 3406 DT diesel engine, 262.5KVA/480V/315.75AMP. In good condition. (Meter Reads 08,931 Hours) (Purchased New) (Unit #35009)

ALLMAND Model LD30-4M2W Portable Light Plant, s/n 077625
ALLMAND Model LD30-4M2W Portable Light Plant, s/n 077625
ALLMAND Model LD30-4M2W Portable Light Plant, s/n 077625, powered by Lister 2 cylinder diesel engine, equipped with electric raise, (4) lights, and 205/70R15 tires. In good condition with good tires. (Meter Reads 5,384 Hours) (Purchased New) (Unit #18151)

1999 JEEP Wrangler Sport Jeep
1999 JEEP Wrangler Sport Jeep
1999 JEEP Wrangler Sport Jeep, VIN# 1J4FY19S0XP400794, powered by 4.0L gas engine and 5 speed transmission, equipped with sky jack suspension, rollbar, removable hard top, and 33x12.50R15 tires. In fair to good condition with good tires. (Odometer Reading N/A Dead Battery) (Bad Frame) (No Current Inspection)

1984 JEEP Model CJ7 Renegade 4x4 Jeep
1984 JEEP Model CJ7 Renegade 4x4 Jeep
1984 JEEP Model CJ7 Renegade 4x4 Jeep, VIN# 1JCCE87E7ET109185, powered by 6 cylinder gas engine and automatic transmission, equipped with 31x10.50R15 tires. In fair to good condition with fair to good tires. (Odometer Reads 116,607 Miles) (No Current Inspection) (Runs Rough)

1999 FLEETWOOD Wilderness GL26T Tandem Axle Travel Trailer
1999 FLEETWOOD Wilderness GL26T Tandem Axle Travel Trailer
1999 FLEETWOOD Wilderness GL26T Tandem Axle Travel Trailer, VIN# 1ED1T2628X1478550, equipped with queen bed, head, stove, microwave, sink, AC/gas refrigerator freezer, sofa and chair, (2) man doors, (2) propane tanks, electric brakes, (4) manual leveling jacks, 7,300# GVWR, and 205/75R15 tires. In good condition with good tires. (Slight Front End Damage) (Floor Needs Repaired) (Ed Jr.)

BOMAG Model BW65S Walk Behind Roller, s/n 101100000145
BOMAG Model BW65S Walk Behind Roller, s/n 101100000145
BOMAG Model BW65S Walk Behind Roller, s/n 101100000145, powered by Hatz 1 cylinder diesel engine and hydrostatic transmission, equipped with 25.5” smooth drums, crank start, and water system. In good condition. (Purchased New) (Unit #25037)

BOMAG Model BW65S Walk Behind Roller, s/n 100120197
BOMAG Model BW65S Walk Behind Roller, s/n 100120197, powered by Hatz 1 cylinder diesel engine and hydrostatic transmission, equipped with 25.5 smooth drums, crank start, and water system. (Purchased New) (Unit #25039)

JOHN DEERE Model GX325 Riding Mower, s/n M0G3258111042
JOHN DEERE Model GX325 Riding Mower, s/n M0G3258111042
JOHN DEERE Model GX325 Riding Mower, s/n M0G3258111042, powered by John Deere 18HP gas engine and hydrostatic transmission, equipped with 48” mower deck. In good condition with good tires. (Meter Reads 615 Hours)

JOHN DEERE Model LT180 Riding Mower, s/n M0L180J040849
JOHN DEERE Model LT180 Riding Mower, s/n M0L180J040849
JOHN DEERE Model LT180 Riding Mower, s/n M0L180J040849, powered by John Deere 17HP gas engine and hydrostatic transmission, equipped with 48” mower deck. In good condition with good tires.

JOHN DEERE Model STX46 Riding Mower, s/n M00STXI273438
JOHN DEERE Model STX46 Riding Mower, s/n M00STXI273438
JOHN DEERE Model STX46 Riding Mower, s/n M00STXI273438, powered by Kohler Command 15 gas engine and hydrostatic transmission, equipped with 46” mower deck. In good condition with good tires. (Missing Hood)

Overhang Brackets
Overhang Brackets
Overhang Brackets: (264) WILSON Type A Adjustable Bridge Overhang Brackets Consisting of: (12 racks) of (22) brackets per rack.

Parapet Forms
Parapet Forms
Parapet Forms: (38) 33”x10’ Parapet Forms Consisting of: (6 racks) of (6) forms per rack plus (2) additional; (3) 33”x7’ Parapet Forms, with rack

EFCO Column Forms
EFCO Column Forms
EFCO Column Forms: 48”: (3) 12’; (3) 4’; and (1) 2’ • 42”: (1) 12’ and (6) 6’ • 36”: (2) 12’; (7) 4’; (2) 2’; and (1) 1’

EFCO Form Accessories
EFCO Form Accessories
EFCO Form Accessories: (94) 7’5”x5.5” EFCO Form Walers • Assorted Size EFCO Form Walers, She Bolts • (41) 7' Taper Ties • (44) 6' Taper Ties • Shoes • (48) Form Binders, with pins and brackets

Woodworking Equipment and Dimensional Lumber
Woodworking Equipment and Dimensional Lumber
Woodworking Equipment and Dimensional Lumber: 1998 GRIZZLY Model 95912, Z Series, Heavy Duty Wood Spindle Shaper, powered by 5HP single phase electric motor, equipped with power feeder powered by 1/2 HP, 220 volt electric motor • 1998 GRIZZLY Model G1066, 24” Drum Sander, s/n 89001518, powered by 240 volt single phase electric • GRIZZLY Model G1018, 8” Jointer, s/n 537601, powered by 240 volt single phase electric • 1996 GRIZZLY Model G1030 Dust Collector, s/n 8521013, powered by 220 volt single phase 3HP electric motor • 1” Cherry, Oak, and Pine Lumber Consisting of: 7’ to 12’ random lengths and 4” to 8” widths (Lumber Will Be Sold in One Lot and Buyer Must Load; In-Absentia - Located Approximately (40) Miles North of Lock Haven in Tamarack, Pennsylvania)

Contractors Tools and Shop Equipment
Contractors Tools and Shop Equipment
Contractors Tools and Shop Equipment: (14091) 1995 MILLER Bobcat 225G Plus Welder/Generator, s/n KF766377, Onan 16HP gas engine. (Meter Reads 1,664 Hours) (Purchased New) • (14090) 1995 MILLER Bobcat 225G Plus Welder/Generator, s/n KF766703, Onan 16HP gas engine. (Meter Reads 1,561 Hours) (Purchased New) • Portable Welder/Generator, 1 cylinder diesel engine (Relay Needs Replaced) • (4) HOMELITE 3,000 Watt Gas Powered Generators • (2) HONDA EB3500 Gas Powered Generators • AMT 3” Portable Trash Pump • (2) HOMELITE 3” Trash Pumps • (2) WACKER PT3, 3” Trash Pumps • FLYGT 4” Electric Submersible Pump, with starter box • WACKER GVR151Y Foot Compactor • WACKER BS60Y Foot Compactor • STIHL FS110 String Trimmer • HUSQVARNA 223L String Trimmer • (2) GILSON Sample Screen Shakers • GILSON Splitter • Sieve Shaker • (2) Georgia Buggies • (2) 55 Gallon Drums of ISO220 Severe Duty Gear Lubricant • Approximately (700') of 7/8" Wire Rope

(2) GORMAN RUPP Model T4A605-B/F, 4” Transfer Pumps, s/n 1529887N and s/n 152988N
(2) GORMAN RUPP Model T4A605-B/F, 4” Transfer Pumps, s/n 1529887N and s/n 152988N
(2) GORMAN RUPP Model T4A605-B/F, 4” Transfer Pumps, s/n 1529887N and s/n 152988N, powered by 15HP, 3 phase electric motors, equipped with Hayward butterfly valves. In good condition.

(2) UNUSED TOSHIBA 20HP, 3-Phase, 256T Frame Electric Motors
(2) UNUSED TOSHIBA 20HP, 3-Phase, 256T Frame Electric Motors
(2) UNUSED TOSHIBA 20HP, 3-Phase, 256T Frame Electric Motors

CATERPILLAR/DJB Model D22 Articulated End Dump, s/n 22DB3906
CATERPILLAR/DJB Model D22 Articulated End Dump, s/n 22DB3906
CATERPILLAR/DJB Model D22 Articulated End Dump, s/n 22DB3906, powershift transmission and 26.5x25 tires. In good condition with fair to poor tires. (Meter Reads 06,514 Hours) (Complete Parts Truck With The Exception of Engine) (Unit #27011)

1981 BARBER GREENE Model SB131 Rubber Tired Asphalt Paver, s/n 378
1981 BARBER GREENE Model SB131 Rubber Tired Asphalt Paver, s/n 378
1981 BARBER GREENE Model SB131 Rubber Tired Asphalt Paver, s/n 378, powered by John Deere 4 cylinder diesel engine and hydraulic drive, equipped with 10’ to 20’ propane heated vibratory screed, dual operator stations, and 16.00x24 tires. In poor condition with fair to poor tires. (Meter Reads 2,665 Hours) (Unit #28010)

1989 INGERSOLL RAND Model E-50W-C, 50KW Portable Generator, s/n 176126U89801
1989 INGERSOLL RAND Model E-50W-C, 50KW Portable Generator, s/n 176126U89801
1989 INGERSOLL RAND Model E-50W-C, 50KW Portable Generator, s/n 176126U89801, powered by Cummins 4BT3.9G diesel engine, equipped with 215/75R15 tires. In good condition with good tires. (Meter Reads 22,719 Hours) (Engine Good; Not Making Electric) (Purchased New) (Unit #35008)

 
1440 Cowpath Rd. Hatfield, Pa 19440 • PH: 215 361-9099 • FAX: 215 361-9212
Site Design by Bergey Creative Group © 2012