|
|
1999 AMADA Model PEGA 345 (304050) 30 Ton CNC Turret Punch, s/n AQ450334
1999 AMADA Model PEGA 345 (304050) 30 Ton CNC Turret Punch, s/n AQ450334, (58) turret stations, 51.4x107 table with (2) clamps, 2-position auto indexing, Amada Amadan-O4P-C controller, s/n E99504229, foot pedal and pedestal controls. (Meter Reads 52,549 Hours) (19,694 Cycle Hours) (19,175,061 Total Hits) (Loading Fee $2,485) |
|
1989 AMADA Model PEGA 345 (304050), 30 Ton CNC Turret Punch, s/n AQ450032
1989 AMADA Model PEGA 345 (304050), 30 Ton CNC Turret Punch, s/n AQ450032, (58) turret stations, 51.4x107 table with (2) clamps, (1) single station indexing, Amada Amadan-O4P-C controller, s/n 9044091, and foot pedal controls. (Meter Reads 64,963 Hours) (23,849 Cycle Hours) (Loading Fee $2,485) |
|
1964 FEDERAL Model No. 5, 60 Ton Mechanical Punch Press, s/n 5-1896
1964 FEDERAL Model No. 5, 60 Ton Mechanical Punch Press, s/n 5-1896, 10 throat, 18.5x29.5 bed area, 90 spm, 2.5 ram adjustment, 5 HP, and safety arms. (Loading Fee $1,180) |
|
JOHNSON/SOUTH BEND Model 45FW-AC, 45 Ton Punch Press, s/n 69084
JOHNSON/SOUTH BEND Model 45FW-AC, 45 Ton Punch Press, s/n 69084, equipped with 3” stoke, 11-1/4” shut height, 28”x18” bed, 11-3/8 x 11-13/16 ram area, and 125 strokes per minute. (Loading Fee $1,180) |
|
1996 HITACHI SEIKI Model VM40H Vertical Machining Center, s/n VM4210HL
1996 HITACHI SEIKI Model VM40H Vertical Machining Center, s/n VM4210HL, 208 volt, 3-phase, equipped with Seicos MY programmable controller, X axis 21” travel, Y axis 16” travel, Z axis 16” travel, (20) auto tool change carousel, CT40 Tooling 15”x30” slotted table, and small quantity of tooling. (Z Axis Servo Pack Works Intermittently – Needs Replaced) (Loading Fee $1,890) |
|
HITACHI SEIKI Model VM40H Vertical Machining Center, s/n HVM409-057
HITACHI SEIKI Model VM40H Vertical Machining Center, s/n HVM409-057, 208 volt, 3-phase, equipped with Yasnac MX3 programmable controller, X axis 21” travel, Y axis 16” travel, Z axis 16” travel, (30) tool chain drive automatic tool changer, BT40 tooling, 15”x30” slotted table, and small quantity of tooling. (Loading Fee $1,890) |
|
HITACHI SEIKI Model HT20S II Turning Cell, s/n HTS2252HL
HITACHI SEIKI Model HT20S II Turning Cell, s/n HTS2252HL, 208 volt, 3-phase, equipped with Seiki multi programmable controller, conversational programming, 8” chuck, 16” length capacity, automatic tool setter, (10) tool turret, and 8000RPM max spindle speed. (Loading Fee $1,890) |
|
1983 DARLEY Model EHP 110 31/35, 110 Ton Hydraulic Press Brake, s/n 12462
1983 DARLEY Model EHP 110 31/35, 110 Ton Hydraulic Press Brake, s/n 12462, 122x100 bed size, 14” open height, 9.5 shut height, ESA Duemila S control, and Safe-T-Lite light curtains. (Loading Fee $1,675) |
|
CLEARING/NIAGARA Model HBM-100-8-10, 100 Ton Hydraulic Press Brake, s/n P54413
CLEARING/NIAGARA Model HBM-100-8-10, 100 Ton Hydraulic Press Brake, s/n P54413, 120x96 bed size, 7” shut height, 14 open height, 7 stroke, Hurco Autobend 7 control, and Safe-T-Lite light curtain (Believed To Be Late Nineties Vintage) (Auto Bend Control Not Working) (Loading Fee $1,675) |
|
1984 DARLEY Model EHP80, 80 Ton Hydraulic Press Brake, s/n 12606
1984 DARLEY Model EHP80, 80 Ton Hydraulic Press Brake, s/n 12606, 100x81 bed size, 14” open height, 9.5 shut height, Delem model DA-65R control, and control pedestal. (Loading Fee $1,675) |
|
ENCO Model 3-8-0232 Gap Bed Lathe, s/n 80638
ENCO Model 3-8-0232 Gap Bed Lathe, s/n 80638, 208 volt, 3-phase, equipped with 36” bed, 14” swing, 3-jaw chuck, Z and X axis, digital readout, (4) tool holder, 45 to 1800 RPM spindle speed, and coolant system. |
|
MSC Model 16-40G Gap Bed Lathe
MSC Model 16-40G Gap Bed Lathe, s/n Unknown, 208 volt, 3-phase, equipped with 40” bed, 16” swing, 22 to 1800 RPM spindle speed, and coolant system. |
|
Finishing
Finishing: ROCKWELL Model BH, 6” x 24” Belt Sander, s/n 9083, 208 volt, 3-phase. • FALLS D-BUR-R Model 111 Finish Edge Deburring Machine s/n 2275, 36 width, 24 gauge - 1/4 (Believed To Be Mid Eighties Vintage) • SPIRATRON Model ST-12-M Roto Finish Vibratory Bowl Deburring Machine, s/n 715916, 208 volt, 3-phase, equipped with 55” diameter bowl and wash system. • ROCKWELL DELTA Combination Belt/Disc Sander, Delta 6 Belt & 12 Disc Grinder, motor 1.5 HP, (2) tilting tables • ROYSON Electric Parts Tumbler, throat 17x10.5 • RAYTECH Model Tumble Vibe Electric Parts Tumbler • GLOBE Slow Speed Electric Barrell Tumbler, s/n T12348, 110 volt, single phase • 4BBL Octagon Electric Tumbler, 208 volt, 3-phase • Fast Speed Electric Barrell Tumbler, 208 volt, 3-phase • Model CS-108 Dual Wheel Pedestal Buffer, s/n 06030184, 8 wheel capacity • Dual Wheel Pedestal Buffer, 8” wheel capacity |
|
DELTA ROCKWELL 4-Spindle Gang Drill Press
DELTA ROCKWELL 4-Spindle Gang Drill Press, s/n’s 130-1950, 124-3704, 124-3705, and 3706, 1/2HP heads, 7.5 throat, 21x51 production table, 4 speeds, (1) tapping head (Believed To Be Mid Fifties Vintage) |
|
INGERSOLL RAND Model JRN50H-CC, 145PSI Rotary Screw Electric Air Compressor, s/n NV3299U08031
INGERSOLL RAND Model JRN50H-CC, 145PSI Rotary Screw Electric Air Compressor, s/n NV3299U08031, 50HP, 460 volt, 3-phase, equipped with IR model NVC400A400 air dryer, s/n 294583, and 120 gallon vertical air receiver, (Meter Reads 24,666 Hours) (Loading Fee $2,850) |
|
1993 LEROI Model A219-1, 125PDSIG Rotary Screw Air Compressor, s/n AER0468
1993 LEROI Model A219-1, 125PDSIG Rotary Screw Air Compressor, s/n AER0468, compressor 240 volt, 3-phase, dryer 115 volt, single phase, equipped with General Air Products model GHT110 air dryer, s/n 078-110-06-21-02, rated @ 110DFM (Meter Reads 18,406 Hours) |
|
HAEGER Model HP6-C 6 Ton Insertion Press
HAEGER Model HP6-C 6 Ton Insertion Press, 18 throat, foot pedal controls with Haeger model AF-CH auto feed loader, s/n 260 (Believed To Be Early Eighties Vintage) |
52 - Fasteners and Installation Tool
Fasteners and Installation Tool: 1998 AVDEL Model 07531 Pneumatic Speed Fastener, s/n 98/07146, 70 - 80 psi working pressure, 100PSI max pressure, with case • 1998 AVDEL Model 0753 MK II Pneumatic Speed Fastener, s/n 98/07005, 70 - 80 psi working pressure, 100PSI max pressure, with case • 1998 BOLHOFF Model P803 Pneumatic Blind Rivet Nut Installation Tool, s/n 022176, with hose, regulator, and case. |
55 - Inspection Equipment
Inspection Equipment: DEFELSKO Model Positest Non-magnetic Coating Thickness Tester • KOLN AUTOMOTION Model Quanix 1500 Auto-motion Digital Coating Thickness Tester • FOWLER 20.5 Digital Height Gauge • STARRETT Model 454, 19 Height Gauge • BROWN & SHARPE Model 585, 19 Height Gauge • MITUTOYO 40 Vernier Caliper • STARRETT Model 122, 36” Vernier Caliper • MITUTOYO 24 Vernier Caliper • MITUTOYO Model D 12N, 12 Vernier Caliper • FOWLER Model 950-201 6 Digital Vernier Caliper • STARRETT Depth Micrometer • STARRETT Model Master 199, 15 Precision Level • STARRETT Model 491 Protractor • UNIVERSAL Model 4-5122222 Bevel Protractor, s/n 24720073 • Inspection Scale Set, with 6x12x36 scales • FOWLER Square • MSC Radius Gauge Set • MAIER Pin Gauge Set • VERMONT GAGE Series C Pin Gauge Set, 0.251 to .500 • 2008 WEBBER Model RS81A1 Block Gauge Set • Thread Gauge Set, 24-piece • Steel Inspection Block, size 8x12x5 • CT&S Inspection Angle, size 8x8x8 • Inspection Angle, size 6x18x6 |
|
2007 YALE Model GLC050VXNUAE083, 5,000 lb Lift Truck
2007 YALE Model GLC050VXNUAE083, 5,000 lb Lift Truck, s/n A910V09170E, propane, equipped with 42 forks, lift height 189, 3-stage mast, side-shift, FOPS canopy, light package, 21x7x15 front and 16x5x12.5 rear cushion tires. (Tank Not Included) (Meter Reads 03,452 Hours) |
|
1990 NISSAN Model CPH01A15V, 3,000 lb Cushion Tired Forklift
1990 NISSAN Model CPH01A15V, 3,000 lb Cushion Tired Forklift, s/n CPH01-920438, powered by 4 cylinder propane engine and shuttle transmission, equipped with 130” 2-stage mast, mast tilt, 45” forks, 18x6x12 front and 14x4.5x8 rear tires. In good condition with very good tires. (Meter Reads 3,372 Hours) (Tank Not Included) |
|
1997 MACK Model CS200P Single Axle Van Body Truck
1997 MACK Model CS200P Single Axle Van Body Truck, VIN# VG6BA07A5VB502062, powered by Mack 6 cylinder diesel engine and automatic transmission, equipped with 1998 Morgan aluminum van body 22'6x8'6, rear roll-up door, air brakes, aluminum disc wheels, and 11R22.5 tires. In good condition with good tires. (283,760 miles) |
|
1999 ANVER Model EC00M6-86-3/44, 6,000 lb Vacuum Lifter, s/n 997598
1999 ANVER Model EC00M6-86-3/44, 6,000 lb Vacuum Lifter, s/n 997598, 110 volt, single phase, equipped with VPF-3 Vac-Pack vacuum generator, (6) 16” vacuum cups, 10’ max load length, and 6’ max load width |
|