|
|
|
|
2002 MORBARK Model 7600 Wood Hog Portable Horizontal Grinder, s/n 185-1041
2002 MORBARK Model 7600 Wood Hog Portable Horizontal Grinder, s/n 185-1041, powered by Cat 3412E, 1,000HP diesel engine, equipped with 5-chain feed conveyor, 54” width drum, 44” hydraulic folding discharge conveyor, wireless remote, mounted on quad axle carrier with air ride suspension and (2) hydraulic stabilizers, and 255/70R22.5 tires. In good condition with good tires. (Meter Reads 10,482 Hours) (Mill Replaced Approximately 2,000 Hours Ago; (4) Hydraulic Cylinders Repacked and (2) New Cylinders; (5) New Feed chains with 500 Hours; New Conveyor Motor) |
|
|
2000 MORBARK Model 1500 Portable Tub Grinder, s/n 575-049
2000 MORBARK Model 1500 Portable Tub Grinder, s/n 575-049, powered by Cat 3508DITA, 1,000HP diesel engine, equipped with 39.5” rear discharge conveyor, wireless remote, diesel powered preheater, removable safety roof, mounted on tri-axle carrier with (2) hydraulic stabilizers, spring suspension, and 255/70R22.5 tires. In good condition. (Meter Reads 8,090 Hours) (Rebuilt Engine With New OEM Crank Shaft, Pistons, Rods, and Heads, New Clutch, Rebuilt Gear Box and New Drive Shaft – Less Than 1,000 Hours) (Work Performed by Timber Ridge Equipment Co.) (1 Set UNUSED Hammers and Rods) (Air Compressor – Missing Engine) (Overall Width 11’10”) |
|
|
1998 VERMEER Model TG400A/AL, 10’ Portable Tub Grinder, s/n 1VRN462T6W1000477
1998 VERMEER Model TG400A/AL, 10’ Portable Tub Grinder, s/n 1VRN462T6W1000477, powered by Cat 3406, 400HP diesel engine, equipped with log loader with rotating grapple and operators cab, 30” rear folding discharge conveyor, mounted on tri-axle trailer with (2) hydraulic outriggers and 215/75R17.5 tires. In good condition. (Meter Reads 05,946 Original Hours On Machine and 04,945 Hours On Cab Meter) (Engine Rebuild 2017 – Less Than 200 Hours) (Purchased New March 2003) |
|
|
1996 MORBARK Model 30 Total Chiparvester Portable Whole Tree Chipper, s/n 1962
1996 MORBARK Model 30 Total Chiparvester Portable Whole Tree Chipper, s/n 1962, powered by Cat 3412, 800HP diesel engine, equipped with Morlift 1000 log loading boom, Rotobec 360° rotating grapple, joystick controls, folding operator cab, 4-knife chipper drum, and Espar engine preheater, mounted on tandem axle carrier with (4) hydraulic outriggers, spring suspension, and 295/75R22.5 tires. (Not Running – Engine Seized) |
|
|
POWERSCREEN Model 620, 6’ x 20’ Portable Trommel Screen
POWERSCREEN Model 620, 6’ x 20’ Portable Trommel Screen, s/n unknown, powered by Deutz water cooled diesel engine, equipped with 36” hydraulic folding rear discharge conveyor, 33” side folding discharge conveyor, 16” x 50’ stacking conveyor (converted to hydraulic), mounted on tandem axle carrier with (2) hydraulic stabilizers and 425/65R22.5 tires. In good condition. (Meter Reads 07,356 Hours) (Engine Rebuilt in 2012) (Under 1,000 Hours on Engine Rebuild) (No ID Plate) |
|
|
1998 PRENTICE Model 410E Knuckleboom Log Loader, s/n 54337
1998 PRENTICE Model 410E Knuckleboom Log Loader, s/n 54337, powered by Cummins 6BTA diesel engine, equipped with Prentice C848W rotating grapple, mounted on Evans D-30 tandem axle carrier with (4) hydraulic outriggers and 11R22.5 tires. In good condition with good tires. (Meter Reads 00,360 Hours – Meter Changed at 9,266 Hours) (No ID Plate – Year and s/n From Records) |
|
|
DOOSAN Model DX225LC Hydraulic Excavator, s/n 70005038
DOOSAN Model DX225LC Hydraulic Excavator, s/n 70005038, powered by Doosan diesel engine, equipped with 9’6” dipper stick, Geith 42” digging bucket, thumb bracket, pattern changer, enclosed ROPS cab, and 31.5” TBG pads. In fair to good condition with fair to good undercarriage. (Dipper Stick Fishplated) |
|
|
1984 CATERPILLAR Model 215 Hydraulic Excavator, s/n 95Z00640
1984 CATERPILLAR Model 215 Hydraulic Excavator, s/n 95Z00640, powered by Cat 3304 diesel engine, equipped with 9’2” dipper stick, 40” digging bucket, enclosed ROPS cab, and 30” TBG pads. (Hour Meter Removed) (Berco Undercarriage Replaced by Durable Undercarriage) (Grapple Sold Separately) |
|
|
2004 JOHN DEERE Model 200CLC Hydraulic Excavator, s/n 504517
2004 JOHN DEERE Model 200CLC Hydraulic Excavator, s/n 504517, powered by JD diesel engine and hydraulic drive, equipped with 9'6" dipper stick with thumb bracket, Geith 42" digging bucket, operators cab with air conditioning, and 32.5" TBG pads. In fair to good condition with fair undercarriage. (Meter Reads 10,857 Hours) |
|
|
5-Tine Grapples
5-Tine Grapples: ALLIED 48”, 5-Tine Grapple (Doosan DX225) • WAGWAY 50”, 5-Tine Grapple (Missing Pins and Bushings) (Cat 330) • 36”, 5-Tine Grapple (Cat 215) • 36”, 5-Tine Grapple (Cat 225) • GEITH 44”, 5-Tine Grapple (Broken Ear) |
|
|
Excavator Buckets
Excavator Buckets: GEITH 42” Digging Bucket (Doosan DX225) • 46” Digging Bucket (Komatsu PC220) • 36” Digging Bucket (Komatsu PC220) |
|
|
1998 CATERPILLAR Model D4C XL Crawler Tractor, s/n 6YL02137
1998 CATERPILLAR Model D4C XL Crawler Tractor, s/n 6YL02137, powered by Cat 3046 diesel engine and powershift transmission, equipped with 6-way straight blade, tow pin, ROPS canopy, and 18” SBG pads. In good condition with good undercarriage. (Meter Reads 5,681 Hours) (Undercarriage Replaced August 2012 @ 4,015 Hours by Durable Undercarriage) |
|
|
1995 CATERPILLAR Model D250E, 25 Ton, 6x6 End Dump, s/n 5TN00277
1995 CATERPILLAR Model D250E, 25 Ton, 6x6 End Dump, s/n 5TN00277, powered by Cat diesel engine and powershift transmission, equipped with bed liners and 23.5R25 tires. In fair to good condition with fair to good tires. (Meter Reads 11,815 Hours) (Rebuilt Transmission, Torque Converter, Oil Cooler, and Oil Pump at Foley – July 2006 @ Approximately 10,500 Hours – Work Documented Without Meter Reading) (Serial Number From Owner Records) |
|
|
1975 CATERPILLAR Model 980B Rubber Tired Loader, s/n 89P04725
1975 CATERPILLAR Model 980B Rubber Tired Loader, s/n 89P04725, powered by Cat diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, enclosed ROPS cab, and 29.5-25 L-4 tires. In fair to good condition with very good tires. (Serial Number and Year From Owner Records) (Leak in Hydraulic Oil Cooler) |
|
|
1988 JOHN DEERE Model 644E Rubber Tired Loader, s/n 519944
1988 JOHN DEERE Model 644E Rubber Tired Loader, s/n 519944, powered by JD diesel engine and powershift transmission, equipped with general purpose loader bucket and enclosed ROPS cab. In fair condition with poor tires. (Meter Reads 15,562) (Runs – Engine Weak) |
|
|
2000 DAEWOO Model MEGA 200TC-III Rubber Tired Loader, s/n 1012
2000 DAEWOO Model MEGA 200TC-III Rubber Tired Loader, s/n 1012, powered by Daewoo diesel engine and powershift transmission, equipped with hydraulic coupler, enclosed ROPS cab, and 20.5R25 tires. Very good tires. (Meter Reads 5,628 Hours) (Needs Rear Axle Repaired) (Broken Gear in Differential - Axles Removed - Rear Axle Free Wheeling) |
Loader Attachments
Loader Attachments: ROCKLAND 10 Cubic Yard Light Material Bucket (Cat 980C) • HYDRO AX Feller Buncher Felling Head • Hanging and Bolt-On Bucket Fork Sets |
|
|
1999 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN01725
1999 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN01725, powered by Cat 3304 diesel engine and powershift transmission, equipped with single arch grapple boom, Esco rotating grapple, hydraulic winch, 8’1” stacking blade, enclosed ROPS cab with sweeps, side screens, and air conditioning. In fair to good condition with fair tires. (Meter Reads 10,479 Hours) |
|
|
1998 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN01542
1998 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN01542, equipped with dual arch grapple boom, hydraulic rear winch, 9’ stacking blade, cab with sweeps, and 24.25-32 logging tires. (Parts Only) (All Rear Hydraulic Lines Disconnected) (Cab Glass Missing) (1 Flat Tire) |
|
|
2006 PETERBILT Model 379 Tandem Axle Truck Tractor
2006 PETERBILT Model 379 Tandem Axle Truck Tractor, VIN# 1XP5DB0X06N877326, powered by Cat C15, 600HP diesel engine and Eaton Fuller 8LL transmission, equipped with 46,000 lb rears, 12,000 lb front axle, double frame, air ride suspension, wetline, 3-stage engine brake, air slide 5th wheel, full lock main differential, aluminum wheels, power windows, cruise control, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 605,502 Miles) (Meter Reads 22,045 Hours) (New Cylinder Head and (2) Turbos – July 2022) |
|
|
1994 AUTOCAR Tandem Axle Truck Tractor,
1994 AUTOCAR Tandem Axle Truck Tractor, VIN# 4V2SCBCH8RR513273, powered by Cat 3406, 425HP diesel engine and Eaton Fuller 8LL, 10 speed transmission, equipped with double frame, spring/walking beam suspension, wetline plumbing, stationary 5th wheel, air conditioning, 425/65R22.5 front and 11.00R22 rear tires. In good condition with good tires. (Odometer Reads 712,428 Miles) (Meter Reads 27,124 Hours) |
|
|
1986 TUSCO Model THG60, 60 Ton Tri-Axle Lowboy Trailer
1986 TUSCO Model THG60, 60 Ton Tri-Axle Lowboy Trailer, VIN# 2T9THG6004001579, equipped with non ground bearing detachable gooseneck, wetline, 102” x 22’6” level deck, 12’ deck over axles, air ride suspension, chain dogs, and 275/70R22.5 tires. In fair to good condition with fair to good tires. (Year, Mfg, Model, and Capacity From Owner Records) (Missing VIN Plate) |
|
|
2003 PEERLESS Model 45-CTSSF, 45’ Tandem Axle Walking Floor Trailer
2003 PEERLESS Model 45-CTSSF, 45’ Tandem Axle Walking Floor Trailer, VIN# 1PLE0452X3PJ53097, equipped with Keith walking floor, manual tarp, air ride suspension, 65,000 lb GVWR, swing rear doors, and aluminum wheels. In good condition with good tires. |
|
|
1999 TRAIL-STAR 45’ Tandem Axle Walking Floor Trailer
1999 TRAIL-STAR 45’ Tandem Axle Walking Floor Trailer, VIN# 1T9SF45BXX1066806, equipped with Keith walking floor, air ride suspension, single barn door gate, aluminum frame, and 11R24.5 tires. In fair to good condition with fair to good tires. (Floor In Poor Condition) |
|
|
2001 FORD Model F-450XL Super Duty Single Axle Service Truck
2001 FORD Model F-450XL Super Duty Single Axle Service Truck, VIN# 1FDXF47F21ED05000, powered by 7.3L diesel engine and automatic transmission, equipped with Knapheide 11’ open service body, Auto Crane 4004EH, 4,000 lb 3-section service crane, gas powered air compressor, oxygen/acetylene torch set, dual rear wheels, work bumper with vise, cruise control, and air conditioning. In fair condition with fair tires. (Odometer Reads 213,090 Miles) (Slight Hood Damage) (Service Crane Not Operating) (LINCOLN WELDER NOT INCLUDED) |
|
|
1986 CHEVROLET Single Axle Fuel/Lube Truck
1986 CHEVROLET Single Axle Fuel/Lube Truck, VIN# 1GBM7D1G2GV119122, powered by Detroit 8.2L diesel engine and 5 speed transmission with 2 speed rear, equipped with (8) product tanks, (6) product reels, and (2) fuel reels. (Truck Runs and PTO Good) (Radiator Leaks) |
|
|
GMC Single Axle Dump Truck
GMC Single Axle Dump Truck, VIN# CE531P101218, powered by V-6 gas engine and manual transmission, equipped with 1,000 gallon steel water tank. In fair condition. (Site Truck Only – No title) |
|
|
JD Lawn Tractor, Dump Cart, and Spreader
JOHN DEERE Model LA105 Lawn Tractor, powered by JD 19.5HP gas engine and 5 speed power shift transmission, equipped with 42” mower deck. In good condition. (Meter Reads 139 Hours) • JOHN DEERE Dump Cart, with poly tub • JOHN DEERE Broadcast Spreader, with poly tub |
|
|
Contractors Tools and Equipment
Contractors Tools and Equipment: GATES 4-20 Mobile Crimp Hydraulic Hose Crimping Machine, with collets and fittings • (3) Oxygen and (5) Acetylene Gas Bottles • HONDA WT30X, 3” Trash Pump • UNUSED PREDATOR 3” Trash Pump • Suction and Discharge Hose • NORTH AMERICAN Wheelborrow Air Compressor, 6.5HP • EMGLO Air Compressor, Honda 5HP • (2) 3’ x 8’ x 1/2” Steel Plate • (7) 4’ x 10’ x 1/4” Steel Plate • 500 Gallon Skid Mounted Fuel Tank, with 12 volt electric pump • Hydraulic Pole Saw and (3) Hydraulic Limb Loppers, with fiberglass poles • STIHL SG17 Backpack Blower, with spray unit • STIHL BR340 Backpack Blower • (10) STIHL, HUSQVARNA, AND PARTNER Chain Saws • Antique 2-Man Chain Saw • Assortment of Chain Saw Bars and Chain • (7) Dump Carts, with poly tubs • Conveyor Belting and Splicing Hardware • Used 30.5L-32 Tires and Rims |
|
